|
|
|
National Stock Number:
3040-01-338-3674
Federal Supply Class:
3040
National Item Identification Number:
013383674
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1387F91 FIND 4 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 1663C90 | 30828 | KROBACH MFG. CORP. | | 1663C90 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 1663C90 H01 | 90099 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2290 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.250 INCHES MINIMUM AND 1.251 INCHES MAXIMUM | | OVERALL LENGTH | 29.000 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.2505 INCHES MINIMUM AND 1.2515 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.650 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 4 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|