|
|
|
National Stock Number:
3040-01-338-4433
Federal Supply Class:
3040
National Item Identification Number:
013384433
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1704350 | 45152 | OSHKOSH CORP | | 1704350 | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.6253 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 4.730 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 16.810 INCHES NOMINAL | | SECOND END DIAMETER | 2.4940 INCHES NOMINAL | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 2.935 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.4940 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 2.1415 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 10 | | SPECIAL FEATURES | 1ST END INCLUDES 2.500 IN. DP HOLE TAPPED 0.750 IN.-10 UNC;2ND END INCLUDES A 0.437 IN. DIA HOLE DRILLED 10.000 INTO CENTER AND INTERSECTING WITH TWO O.125 IN. HLS;MACHINE ONTO THE CENTER OF THE SHAFT IS AN EXTERNAL INVOLUTE SPLINE W/4.465 DIA,26T,20 DEG PRESSURE ANGLE,4.333 IN. PITCH DIA | | STEP QUANTITY | 7 |
|
|