3040-01-338-5893, SHAFT,SHOULDERED

1430-01-338-5894 SPARES SET,GUIDED MISSILE CONTRO

National Stock Number:
3040-01-338-5893

Federal Supply Class:
3040

National Item Identification Number:
013385893

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

58648

93835

PARKER HANNIFIN CORPORATION

Techincal Specification:

END SIMILARITY	IDENTICAL
FIRST END DIAMETER	0.4030 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER	0.4030 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER	0.3250 INCHES MINIMUM AND 0.3340 INCHES MAXIMUM
FIRST END SPLINE QUANTITY	12
FIRST END STYLE	SPLINED (INVOLUTE)
FIRST END PITCH DIAMETER	0.3750 INCHES NOMINAL
FIRST END PRESSURE ANGLE	30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH	0.474 INCHES MINIMUM AND 0.490 INCHES MAXIMUM
LARGEST STEP DIAMETER	0.279 INCHES NOMINAL
OVERALL LENGTH	1.465 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 CLASS 17-4PH ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL CORROSION RESISTING
SECOND END DIAMETER	0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
SECOND END PITCH DIAMETER	0.4580 INCHES NOMINAL
SECOND END PRESSURE ANGLE	30.0 DEGREES NOMINAL
SECOND END SPLINE LENGTH	0.637 INCHES MINIMUM AND 0.663 INCHES MAXIMUM
SECOND END SPLINE MAJOR DIAMETER	0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER	0.3950 INCHES MINIMUM AND 0.4040 INCHES MAXIMUM
SECOND END SPLINE QUANTITY	11
STEP QUANTITY	1

Click here to Register for Free 30-day Trial