|
|
|
National Stock Number:
3040-01-339-7508
Federal Supply Class:
3040
National Item Identification Number:
013397508
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 14-D-414 | 03705 | APEX TOOL GROUP, LLC | | 510-17248-1 | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | OVERALL LENGTH | 6.336 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4150 OR STEEL COMP 1022 OR STEEL COMP 4340 | | SPECIAL FEATURES | XFIRST END EXTERNAL SPLINE DATA INCLUDES TYPE FILLET ROOT SIDE FIT ASA B5 15-1950,15 TEETH,PITCH 32/64,PITCH DIA 0.469 IN.,PRESSURE ANGLE 30 DEGREES,NOMINAL OUTSIDE DIA 0.500,NOMINAL ROOT DIA 0.420,MEASURING PIN DIA 0.060,SECOND END EXTERNAL SPLINE DATA INCLUDES TYPE FILLET ROOT SIDE FIT ANSI B92.1A-1976,15 TEETH,PITCH 32/64,PITCH DIA 0.469 IN.,PRESSURE ANGLE 30DEGREES,ROOT RADIUS 0.009,MAJOR DIA 0.500 IN.,FORM DIA 0.504 IN. MAX,MINIMUM MINOR DIA 0.395 IN.,MEASURING PIN DIA 0.060 IN. |
|
|