|
|
|
National Stock Number:
3040-01-358-6150
Federal Supply Class:
3040
National Item Identification Number:
013586150
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3502025 | 99193 | HONEYWELL INTERNATIONAL INC. | | 3502025-1 | 59364 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.5800 INCHES NOMINAL | | FIRST END DIAMETER | 0.4500 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.3700 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.1040 INCHES MAXIMUM | | FIRST END SLOT DEPTH | 0.1550 INCHES MAXIMUM | | FIRST END SLOT WIDTH | 0.1550 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED AND SLOTTED | | LARGEST STEP DIAMETER | 0.4167 INCHES MAXIMUM | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.4650 INCHES MAXIMUM | | SECOND END DIAMETER | 0.4167 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.0650 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0450 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.2800 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.0322 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.4640 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.3668 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 23 | | SPECIAL FEATURES | SECOND END HAS INTERNAL INVOLUTE SPLINES. | | STEP QUANTITY | 5 |
|
|