|
|
|
National Stock Number:
3040-01-463-5334
Federal Supply Class:
3040
National Item Identification Number:
014635334
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 167-6926191 PC146 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6926191 | 53711 | NAVAL SEA SYSTEMS COMMAND | | LH5167617 PC146 | 34293 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.750 INCHES NOMINAL | | FIRST END DIAMETER | 1.2500 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.7500 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.7500 INCHES NOMINAL | | FIRST END STEP LENGTH | 0.062 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | FIRST END WIDTH ACROSS FLATS | 0.623 INCHES NOMINAL | | LARGEST STEP DIAMETER | 2.188 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTMA 276 TYPE 316 CONDITION A ASSN STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 316 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.375 INCHES NOMINAL | | SECOND END DIAMETER | 0.7031 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.812 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.0625 INCHES NOMINAL | | SECOND END STYLE | SQUARE (ROUND CORNERS) | | SECOND END WIDTH ACROSS FLATS | 0.621 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | 1ST END 3/4 INCH 16UNF-3A;2ND END 5/8-11UNC 3A;MAJOR DIAMETER NOT TO EXCEED DISTANCE ACROSS FLATS OR SQUARES; BALLISTIC DOORS, HATCHES AND SCUTTLES NON-STANDARD | | STEP QUANTITY | 8 |
|
|