|
|
|
National Stock Number:
3040-01-467-7192
Federal Supply Class:
3040
National Item Identification Number:
014677192
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 92007A1117 | 01365 | MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER | | 92007A1117 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 92007A1117 | 0C9L5 | GENERAL DYNAMICS LAND SYSTEMS CUSTOMER SERVICE & SUPPORT COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.554 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.554 INCHES NOMINAL | | FIRST END DIAMETER | 0.5625 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.4830 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0900 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | LARGEST STEP DIAMETER | 1.957 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 14.630 INCHES NOMINAL | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.632 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.9000 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.500 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0950 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.220 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.632 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4290 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE, AND EXTERNALLY THREADED | | SPECIAL FEATURES | NEXT HIGHER ASSY-GUN FEEDER; SIMILAR TO P/N 92007A0386; HEAT TREATED; PHOSPHATE FINISH W/SOLID FILM LUBRICANT OR OIL COATING | | STEP QUANTITY | 8 | | SUPPLEMENTARY FEATURES | SPLINED 2ND STEP 1ST END; .7492" DIA TAPERED UP TO .7866" DIA 3RD STEP; FULL SPLINE 9.12"; 23 TEETH; PRESSURE ANGLE 30 DEG.; LARGEST DIA INCL 4 SLOTS .398" WIDE AT 90 DEG ANGLES | | SURFACE FINISH | 125.0 MICROINCHES |
|
|