|
|
|
National Stock Number:
3040-01-469-1163
Federal Supply Class:
3040
National Item Identification Number:
014691163
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 12462887 | 076M6 | AMZ ALABAMA INC. | | 12462887 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.7500 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.7500 INCHES NOMINAL | | MATERIAL | STEEL COMP 304 | | OVERALL LENGTH | 7.613 INCHES NOMINAL | | SECOND END DIAMETER | 1.7500 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.7500 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.7150 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 13 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 1.5200 INCHES NOMINAL | | SPECIAL FEATURES | NHA POWER TAKEOFF TRANSMISSION;END ITEM CARGO CARRIER 2350-01-456-7884;FIRST END IS QUILLED; HEAT TREATMENT REQUIRED: QUENCH AND TEMPER TO ROCKWELL C32 THRU C36; SHOT PEEN ENTIRE PART TO AN INTENSITY OF .007A TO .014A PER MIL-S-13165 EXCEPT AREAS DESIGNATED; PHOSPHATE COAT ALL SURFACES PER SPEC DOD-P-16232, TYPE M, CLASS 2, WAIVE ABRASIVE BLAST REQUIREMENTS;USING NON-ACID BASE WHITE INK FOR MARKING | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|