|
|
|
National Stock Number:
3040-01-473-6313
Federal Supply Class:
3040
National Item Identification Number:
014736313
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 13495162 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 13588726 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | MIS-PRF-53514 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 1.340 INCHES NOMINAL | | FIRST END DIAMETER | 0.4980 INCHES MINIMUM AND 0.5020 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.3500 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1100 INCHES NOMINAL | | FIRST END INTERNAL THREAD LENGTH | 0.240 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED | | MATERIAL | STEEL | | OVERALL LENGTH | 11.725 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.895 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.3500 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1100 INCHES NOMINAL | | SECOND END DIAMETER | 0.4980 INCHES MINIMUM AND 0.5020 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED | | SECOND END INTERNAL THREAD LENGTH | 0.240 INCHES NOMINAL | | SPECIAL FEATURES | PASSIVATE SURFACE TREATMENT; WEIGHT NOT TO EXCEED 0.750 LBS; END SCREW HOLES 0.164-32 UNC; 3RD GROOVE 7.200 IN. FROM 1ST END, 0.110 IN. WIDE, 0.350 IN. DIAMETER |
|
|