|
|
|
National Stock Number:
3040-01-478-3413
Federal Supply Class:
3040
National Item Identification Number:
014783413
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| K652094-15 | 84955 | KAMAN AEROSPACE CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END BEARING SEAT DIAMETER | 0.4750 INCHES NOMINAL | | FIRST END BEARING SEAT LENGTH | 0.1900 INCHES NOMINAL | | FIRST END DISTANCE FROM BEARING SEAT TO END | 0.3950 INCHES NOMINAL | | FIRST END DIAMETER | 0.1750 INCHES NOMINAL | | FIRST END STYLE | BEARING SEAT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-PINION COLLECTIVE FRICTION BRAKE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.255 INCHES NOMINAL | | SECOND END DIAMETER | 0.3738 INCHES MINIMUM AND 0.3746 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | NHA PN K652090; PHOSPHATE COAT ALL OVER PER MIL-P-16232 TYPE M, CLASS 3; HEAT TREAT TO 150,000 PSI MIN TS ROCKWELL C34-38 PER KPS 219, CLASS I |
|
|