|
|
|
National Stock Number:
3040-01-482-0281
Federal Supply Class:
3040
National Item Identification Number:
014820281
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 8100-1251-0285 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1251-0285 PT NO 43 | 70876 | BATH IRON WORKS CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 9.2812 INCHES NOMINAL | | SPECIAL FEATURES | 1ST END 5/16"-24 UNF 3, DRILLED 0.875" DIA TO 3 1/16" DEPTH TO CENTER OF CROSS DRILL THROUGH SHAFT; 2ND END 7/8-9 UNC 3, AND FLATTED BOTH SIDES - 0.8125" W | | STEP QUANTITY | 4 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8750 INCHES NOMINAL | | FIRST END INTERNAL THREAD LENGTH | 1.5000 INCHES NOMINAL | | FIRST END STYLE | INTERNAL THREADED | | LARGEST STEP DIAMETER | 1.0000 INCHES NOMINAL | | MATERIAL | STEEL COMP 316 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, HAND LEVER | | PROPRIETARY CHARACTERISTICS | PACS |
|
|