|
|
|
National Stock Number:
3040-01-482-3973
Federal Supply Class:
3040
National Item Identification Number:
014823973
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 122-2298838 PIECE 197 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2298815 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2298824 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.0000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.0000 INCHES NOMINAL | | OVERALL LENGTH | 3.5620 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-21952, HY-80 MACH MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | 1ST END BEVELED 0.2500X45 DEGREES, COUNTER BORED 0.3750 DIA X 0.3800 DEEP TO ACCOMMODATE ALIGNMENT DOWEL; 2ND END CROSS DRILLED 0.2800 IN FROM END 0.2030 DIA THRU FOR PC 201 | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 1.3790 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 3 |
|
|