|
|
|
National Stock Number:
3040-01-482-4678
Federal Supply Class:
3040
National Item Identification Number:
014824678
Description:
CONNECTING LINK,RIGID
Detail:
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
|
Manufacturer Information:
| 6397269 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 8100-1251-0192 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1251-0192 PC 135 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1251-0307 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1251-0307 PC NO 56 | 70876 | BATH IRON WORKS CORPORATION |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A-276, TYPE 316, COND A ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | BODY CONSTRUCTION | SOLID | | BODY THICKNESS | 0.3750 INCHES NOMINAL | | BODY WIDTH | 1.5000 INCHES NOMINAL | | LINK STYLE | STRAIGHT | | OVERALL LENGTH | 31.0000 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CONNECTING ROD, RH HINGE SIDE | | SPECIAL FEATURES | FOUR (4) HOLES DRILLED .499-.500 IN DIA WITH 3/4 IN DIA X 90 DEG CSK-ONE SIDE ONLY. BOTH ENDS ROUNDED 1 R. 1ST END: 1ST HOLE 3/4 IN END-CENTER (E-C), 2ND HOLE 5.000 IN CENTER-CENTER (C-C) FROM FIRST HOLE(OR 5 3/4 IN E-C). 2ND END: 1ST HOLE 3/4 IN E-C, 2ND HOLE 3 1/2 IN C-C FROM 1ST HOLE (OR 4 1/4 IN E-C). DISTANCE BETWEEN TWO CENTER HOLES IS 21 IN C-C. 2 CRESCENT SHAPED CUT OUTS IN ROD TO 1/2 IN DEPTH 2R SAME SIDE OF BAR. UPGRADED MATERIAL (CRES) FROM DRAWING 8100-1251-0307; SIMILAR TO CONNECTING ROD HINGE SIDE LH NSN 3040-01-482-4691. |
|
|