|
|
|
National Stock Number:
3040-01-485-1937
Federal Supply Class:
3040
National Item Identification Number:
014851937
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 122-6659741 PC | 53711 | NAVAL SEA SYSTEMS COMMAND | | 122-6659741 PC3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 122-6659744 PC 3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6659741 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6659744 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL | | OVERALL LENGTH | 9.875 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLUTCH SHAFT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-1222 TY-1, GR B7 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.7470 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | LARGEST STEP OF AXLE IS SAE 0.875 IN DIA CL 10 B FIT SPLINE, SPLINES START AT 0.375 IN FROM FIRST END AND ARE 3.125 IN LONG; DESIGNED FOR GRADE "A" SHOCK RESISTANCE; SECURE USING LOCTITE RETAINING COMPOUND 675 TO MIL-R-46082B;NHA HANGAR DIVISION DOORS. | | STEP QUANTITY | 3 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|