| STRAIGHT UNTHREADED LENGTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM FIRST END |
| STRAIGHT UNTHREADED LENGTH | 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM SECOND END |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.9830 INCHES MINIMUM AND 0.9834 INCHES MAXIMUM SECOND END |
| STRAIGHT UNTHREADED SECTION DIAMETER | 1.0931 INCHES MINIMUM AND 1.0935 INCHES MAXIMUM FIRST END |
| SURFACE TREATMENT | OXIDE AND CADMIUM |
| UNTHREADED SECTION PIN HOLE DIAMETER | 0.1300 INCHES MINIMUM AND 1.1340 INCHES MAXIMUM FIRST END |
| END SIMILARITY | NOT IDENTICAL |
| INVOLUTE SPLINE LENGTH | 0.982 INCHES NOMINAL SECOND END, SECOND PORTION |
| INVOLUTE SPLINE PITCH DIAMETER | 1.7357 INCHES NOMINAL SECOND END, SECOND PORTION |
| INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 30.0 SECOND END, SECOND PORTION |
| INVOLUTE SPLINE QUANTITY | 28 SECOND END, SECOND PORTION |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL LENGTH | 4.500 INCHES NOMINAL |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| SPECIAL FEATURES | FIRST END BORED 1.00 IN. DIA 3.45 IN. LONG THROUGH TO 2ND END; SECOND END INTERNALLY SPLINED STANDARD INVOLUTE, 19 TEETH, MAJOR DIA. .633/.625, PRESSURE ANGLE 30 DEGREES; THREE PIN HOLES; NHA INPUT SPLINE SHAFT ASSEMBLY |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | NOT GIVEN |
| WORM OUTSIDE DIAMETER | 1.310 INCHES MINIMUM AND 1.314 INCHES MAXIMUM |
| WORM PITCH DIAMETER | 1.257 INCHES NOMINAL |
| WORM PRESSURE ANGLE IN DEG | 20.000 |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM THREAD LEAD | 0.1966 INCHES NOMINAL |
| WORM THREAD QUANTITY | 2 |
| WORM THREAD SECTION LENGTH | 1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |