|
|
|
National Stock Number:
3040-01-485-9609
Federal Supply Class:
3040
National Item Identification Number:
014859609
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 167-7066804-70 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7066804 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H547-2002-70 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2470 INCHES MINIMUM AND 1.2480 INCHES MAXIMUM | | FIRST END STYLE | INTERNAL THREADED | | FIRST END INTERNAL THREAD LENGTH | 1.5000 INCHES NOMINAL | | LARGEST STEP DIAMETER | 1.2470 INCHES MINIMUM AND 1.2480 INCHES MAXIMUM | | OVERALL LENGTH | 5.5900 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM-2 COND-ANL FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, LOCKING PINION | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.2040 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 1.0440 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.8300 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.3800 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | STEP QUANTITY | 3 |
|
|