|
|
|
National Stock Number:
3040-01-485-9656
Federal Supply Class:
3040
National Item Identification Number:
014859656
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 167-7066804-29 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7066804 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H547-2002 | 96169 | ELECTRIC BOAT CORPORATION | | H547-2002-29 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.7460 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.9759 INCHES MINIMUM AND 2.9800 INCHES MAXIMUM | | OVERALL LENGTH | 26.7600 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM-2 ANL CD AH FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, UPPER HATCH HINGE | | STEP QUANTITY | 5 | | SPECIAL FEATURES | SHAFT HAS A 1.250 INCH SQUARE FLAT CENTER MIDLINE ONE SIDE. NHA WEAPON SHIPPING TRUNK UPPER HATCH ASSEMBLY |
|
|