|
|
|
National Stock Number:
3040-01-486-4705
Federal Supply Class:
3040
National Item Identification Number:
014864705
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 342-7067322-72 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7067322 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H643-7003 | 96169 | ELECTRIC BOAT CORPORATION | | H643-7003-72 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9980 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.0000 INCHES NOMINAL | | OVERALL LENGTH | 3.6200 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM-2 COND-ANL;AH FIN-B FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT CRANK | | SECOND END DIAMETER | 0.3125 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.5000 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 4 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|