|
|
|
National Stock Number:
3040-01-486-4860
Federal Supply Class:
3040
National Item Identification Number:
014864860
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 342-7067322-31 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7067322 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H643-7003 | 96169 | ELECTRIC BOAT CORPORATION | | H643-7003-31 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.8340 INCHES MINIMUM AND 0.8390 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | OVERALL LENGTH | 5.6700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM-2, COND-ANL(CD) FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, DE LINKAGE | | SECOND END DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM | | SECOND END HOLE DEPTH | 0.9980 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.8340 INCHES MINIMUM AND 0.8390 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 10 | | SECOND END STYLE | CROSS DRILLED HOLE AND SPLINED (STRAIGHT) | | SPECIAL FEATURES | SECOND END DRILLED THRU TO SECURE TO UNIVERSAL JOINT |
|
|