|
|
|
National Stock Number:
3040-01-488-6035
Federal Supply Class:
3040
National Item Identification Number:
014886035
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5HJ53024-103 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.090 INCHES NOMINAL | | FIRST END DIAMETER | 0.6240 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.5850 INCHES MINIMUM AND 0.5910 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0400 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.624 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5663 INCONEL 718 STA .750 DIA ROD LENGTH 4 INCHES ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-CARRIAGE, DOOR, AERIAL REFUEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.010 INCHES NOMINAL | | SPECIAL FEATURES | DURABILITY-CRITICAL PART | | STEP QUANTITY | 5 |
|
|