|
|
|
National Stock Number:
3040-01-488-6045
Federal Supply Class:
3040
National Item Identification Number:
014886045
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5HL46812-101 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.066 INCHES NOMINAL | | FIRST END DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 0.4680 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.0390 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.499 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 PH13-8MO SOLN TREATED .650 DIA STAINLESS ROD LENGTH 1 INCH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-MLG UPLOCK | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.861 INCHES NOMINAL | | STEP QUANTITY | 5 |
|
|