|
|
|
National Stock Number:
3040-01-492-6088
Federal Supply Class:
3040
National Item Identification Number:
014926088
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1554053 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 1554054 | 53711 | NAVAL SEA SYSTEMS COMMAND | | CVAN65-703-1554053 P/N 84 | 53711 | NAVAL SEA SYSTEMS COMMAND | | CVAN65-703-1554054 P/N 10 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 3.0000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 3.000 INCHES NOMINAL | | OVERALL LENGTH | 5.750 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GEAR SPINDLE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-N-3182 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.8750 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.9844 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | SPECIAL FEATURES | MATERIAL, STL ALLOY; FIRST END 0.500 X 45 DEGREE BEVEL FOR WELD, LENGTH OF LARGEST STEP FROM FIRST END 2.00 IN. THEN DROPS TO 1.500 IN. DIA, THIS STEP IS 2.7656 IN. LONG THEN DROPS TO THREADED END; BASE OF THREADS ARE UNDERCUT. | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|