|
|
|
National Stock Number:
3040-01-492-6136
Federal Supply Class:
3040
National Item Identification Number:
014926136
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1899927 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 1899928 | 53711 | NAVAL SEA SYSTEMS COMMAND | | CVAN65-703-1899927 P/N 18 | 53711 | NAVAL SEA SYSTEMS COMMAND | | CVAN65-703-1899928 P/N 19 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL | | OVERALL LENGTH | 1.750 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CAM STOP SHAFT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-657 MIL SPEC SINGLE MATERIAL RESPONSE | | SECOND END DIAMETER | 1.0000 INCHES NOMINAL | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | MATERIAL, BRASS; SLOT CUT IN MAX DIA OF SHAFT PARALLEL WITH THE LENGTH OF SHAFT TO ACCOMODATE PIN P/N CVAN65-703-1899927-17, SLOT IS 0.7812 IN. TOTAL LENGTH WITH 0.1406 IN. RADIUS ON EA END THE SLOT STARTS 0.2344 IN. FROM SECOND END. | | STEP QUANTITY | 2 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|