|
|
|
National Stock Number:
3040-01-492-6393
Federal Supply Class:
3040
National Item Identification Number:
014926393
Description:
CAM,CONTROL
Detail:
AN IRREGULARLY SHAPED ITEM, THAT REVOLVES AROUND AN AXIS, OR SLIDES WITHIN LIMITS, WHICH ACTUATES OTHER PARTS BY CONTACT TO CHANGE THE DIRECTION, SPEED AND/OR TIMING OF A PART IN MOTION. A SHAFT IS NOT INCLUDED. IT USUALLY IS PART OF A CAMSHAFT (AS MODIFIED).
|
Manufacturer Information:
| 7800 | 63600 | CURTISS-WRIGHT FLOW CONTROL CORPORATION | | 7800PL FIND 16 | 63600 | CURTISS-WRIGHT FLOW CONTROL CORPORATION | | 7847 | 63600 | CURTISS-WRIGHT FLOW CONTROL CORPORATION | | 7847-610-003 | 63600 | CURTISS-WRIGHT FLOW CONTROL CORPORATION |
|
Techincal Specification:
| CAM OVERALL LENGTH | 2.130 INCHES NOMINAL | | CAM WIDTH | 1.500 INCHES NOMINAL | | FEATURES PROVIDED | SLOTTED | | MATERIAL | ALUMINUM ALLOY 6061 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CAM, MAIN SHAFT (DUAL SWITCH) | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL HEIGHT | 0.813 INCHES NOMINAL | | SPECIFIC USE | ACTUATES SWITCH | | SPECIAL FEATURES | SHAFT HOLE 1.250 IN. THRU CHAMFER .03 X 45 DEGREES; TWO NUMBER 36 HOLES DRILLED AND TAPPED 6-32 UNC 1.050-1.055 IN. FROM CAM TIP ON CENTER OPP SIDE DRILL NUMBER 28 THRU TO SAW CUT CHAMFER .02 X 45 DEGREES, HOLES ARE 0.196 TYP. FROM EDGE TO CENTER AND ARE FOR CLAMPING CAM TO SHAFT; HARD BLACK ANODIZE .001 THICK. | | SURFACE TREATMENT | ANODIZE |
|
|