| GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| GEAR MATERIAL | STEEL COMP E9310 |
| GEAR OUTSIDE DIAMETER | 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM |
| LONGER SHAFT SEGMENT LENGTH | 6.907 INCHES MINIMUM AND 6.937 INCHES MAXIMUM |
| OVERALL LENGTH | 15.997 INCHES MINIMUM AND 16.047 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE INPUT |
| SHAFT END SIZE | 0.999 INCHES AND 1.2509 INCHES |
| SHAFT END TYPE | CIRCULAR GROOVED, KEYWAY WOODRUFF AND BEARING SEAT |
| SHAFT LENGTH | 15.997 INCHES MINIMUM AND 16.047 INCHES MAXIMUM |
| SHAFT MATERIAL | STEEL COMP E9310 |
| SHAFT LARGEST DIAMETER | 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM |
| SHAFT TYPE | SHOULDERED |
| SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1; NUMBER OF THREAD STARTS 2; MATES WITH P/N H832-1662-4 (CAGE 96169); MATCHED PAIR FOR P/N H832-1662-3 AND 4 NSN 3020-01-494-0562; NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053; USED ON NSSN CLASS SUBMARINE |
| SPECIFICATION/STANDARD DATA | 81349-DOD-F-24669/1 GOVERNMENT SPECIFICATION |
| TEETH TYPE | SINGLE HELIX |
| TOOTH DIRECTION | RIGHT |