|
|
|
National Stock Number:
3040-01-495-1279
Federal Supply Class:
3040
National Item Identification Number:
014951279
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 6546C024 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | 6546C024-1 | 36334 | INDAL TECHNOLOGIES INC. | | 6546C024-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.000 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1900 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, COND A FED SPEC SINGLE MATERIAL RESPONSE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-CAM | | MATERIAL | STEEL COMP 316 | | OVERALL LENGTH | 19.620 INCHES NOMINAL | | SPECIAL FEATURES | THE CAM, LOCK P/N 6546C027-1, AND THE CAM, ACTUATOR P/N 6546B023-1 IS ATTACHED TO THIS SHAFT IN TWO PLACES ON EITHER END OF SHAFT. |
|
|