|
|
|
National Stock Number:
3040-01-496-5992
Federal Supply Class:
3040
National Item Identification Number:
014965992
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7072605-4 | 96169 | ELECTRIC BOAT CORPORATION | | 7072606-4 | 96169 | ELECTRIC BOAT CORPORATION | | 751-7072605 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-7072605-4 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-7072606-4 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7072620-2 | 96169 | ELECTRIC BOAT CORPORATION | | 751-7072620-2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-7077606 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B446 ALLOY N06625 GRADE 1 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,HINGE | | SPECIFICATION/STANDARD DATA | 81346-ASTM-B446 ALLOY N06625 GRADE 1 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION | | SPECIAL FEATURES | STRAIGHT SPLINES ON ONE END OF SHAFT; ASSEMBLED BY (2) 0.750-10 UNRC-3A X 1.750 INCH LONG CAP SCREWS ON EACH END |
|
|