|
|
|
National Stock Number:
3040-01-497-3012
Federal Supply Class:
3040
National Item Identification Number:
014973012
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 4101104-1 FIND 118 | 59364 | HONEYWELL INTERNATIONAL INC. | | 4101105-1 FIND 3 | 59364 | HONEYWELL INTERNATIONAL INC. | | 4102382-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 4102382-1 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6830 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.650 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.5900 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.5790 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 13 | | FIRST END STYLE | SPLINED (STRAIGHT) | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, QUILL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 3.140 INCHES NOMINAL | | SECOND END DIAMETER | 0.6830 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.140 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.0450 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.4700 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.840 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.5900 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.5790 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 13 | | SPECIAL FEATURES | USED ON THE AD/RD MOTOR/TRACTION ASSEMBLY: P/N 4101105-1 OR P/N 4101104-1 |
|
|