|
|
|
National Stock Number:
3040-01-497-9928
Federal Supply Class:
3040
National Item Identification Number:
014979928
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 60-S60-307 | 97674 | CONE DRIVE OPERATIONS INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL | | FIRST END DIAMETER | 5.5000 INCHES NOMINAL | | FIRST END DISTANCE BETWEEN HOLE CENTERS | 1.3687 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.310 INCHES NOMINAL | | FIRST END HOLE DEPTH | 0.8585 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.3125 INCHES NOMINAL | | FIRST END STYLE | TWO CROSS DRILLED HOLES | | LARGEST STEP DIAMETER | 6.002 INCHES NOMINAL | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 14.250 INCHES NOMINAL | | SECOND END DIAMETER | 5.5000 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN KEYWAY CENTERS | 1.500 INCHES NOMINAL | | SECOND END ANGLE BETWEEN KEYWAYS | 90.0 DEGREES NOMINAL | | SECOND END KEYWAY DEPTH | 0.375 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.7500 INCHES NOMINAL | | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 13.500 INCHES NOMINAL | | SECOND END EXTERNAL KEYWAY LENGTH | 4.980 INCHES NOMINAL | | SECOND END STYLE | TWO FLAT KEYWAYS | | SPECIAL FEATURES | MATERIAL IS C.G.S. 4.23; ALTERNATE MATERIAL IS C.G.S. 4.21 OR 60-S60-CSTG FOR CORE SIZES | | STEP QUANTITY | 5 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|