|
|
|
National Stock Number:
3040-01-498-3047
Federal Supply Class:
3040
National Item Identification Number:
014983047
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 596-7409761-86 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7409761 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B831-9110-86 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.3270 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.8100 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1600 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | OVERALL LENGTH | 6.180 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B150, ALY-C63200 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT CAM | | SECOND END DIAMETER | 0.8800 INCHES NOMINAL | | SECOND END STYLE | INTERNAL THREADED | | STEP QUANTITY | 6 |
|
|