|
|
|
National Stock Number:
3040-01-498-5518
Federal Supply Class:
3040
National Item Identification Number:
014985518
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5HR92037-101 | 77272 | THE BOEING COMPANY |
|
Techincal Specification:
| SPECIAL FEATURES | FIRST END IS BORED OUT TO A DEPTH OF 2.36 TO 2.42 INCHES WITH A DIA OF 0.250 INCHES; ITEM IS MISSION CRITICAL; NHA P/N 5HR92002 XMSN ASSEMBLY AIRFRAME MTD ACC DRIVE RIGHT HAND | | STEP QUANTITY | 8 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4200 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.860 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6090 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-ACTUATED DECOUPLER, R.H. AMAD | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.500 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT DEPTH | 0.455 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.145 INCHES NOMINAL |
|
|