|
|
|
National Stock Number:
3040-01-498-5866
Federal Supply Class:
3040
National Item Identification Number:
014985866
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5HR40313-113 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.560 INCHES NOMINAL | | FIRST END DIAMETER | 0.7500 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 1.248 INCHES MINIMUM AND 1.249 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-EXHAUST DOOR, APU, ASSY OF | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.902 INCHES NOMINAL | | SPECIAL FEATURES | ASSY C/O P/N 5HR40313-111 SHAFT 1(MF P/N 5HR40313-115), P/N MS14238B08-22 BUSHING 1; SHAFT HAS 90 DEGREE BEND 2ND END WITH CLEVIS FEATURE; INVOLUTE SPINE STEP TOWARDS CENTER OF SHAFT | | STEP QUANTITY | 4 |
|
|