|
|
|
National Stock Number:
3040-01-498-9623
Federal Supply Class:
3040
National Item Identification Number:
014989623
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1029960 | 1M813 | ELECTROMECHANICAL SYSTEMS INC. | | 68522007 | 1U7M4 | LAUREL TECHNOLOGIES PARTNERSHIP | | 68522007-1 | 1M813 | ELECTROMECHANICAL SYSTEMS INC. | | 68522007-1 | 1U7M4 | LAUREL TECHNOLOGIES PARTNERSHIP |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.279 INCHES NOMINAL | | FIRST END DIAMETER | 0.1120 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INTERMEDIATE SHAFT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.800 INCHES NOMINAL | | SPECIAL FEATURES | USED ON THE BAND 9/10 TRANSMITTER; NEXT HIGHER ASSEMBLY IS THE ROTATOR ASSEMBLY, P/N 46852-1001 ITEM 5; THREADED ON BOTH ENDS (4-40 UNC THREADS) | | STEP QUANTITY | 5 |
|
|