|
|
|
National Stock Number:
3040-01-499-0471
Federal Supply Class:
3040
National Item Identification Number:
014990471
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 29533537 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.4500 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 1.3125 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 1.850 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.3620 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.2140 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 21 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 1.450 INCHES NOMINAL | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-BEVEL GEAR DRIVEN | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 10.650 INCHES NOMINAL | | SPECIAL FEATURES | MATING SPLINE PART NUMBERS: 29533249 & 29533538; STEEL: TMS60420 OR TMS63000 | | STEP QUANTITY | 3 |
|
|