|
|
|
National Stock Number:
3040-01-499-0564
Federal Supply Class:
3040
National Item Identification Number:
014990564
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 518-4457094 | 43689 | HUNTINGTON INGALLS INC | | 518-4457094-23 | 43689 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.6260 INCHES NOMINAL | | HOLE DIAMETER AND LOCATION | 0.2820 INCHES NOMINAL 2ND HOLE | | OUTSIDE DIAMETER | 1.750 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | HUB | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286, CLASS A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY K-500 | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | 1ST HOLE UNC | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED 1ST HOLE AND UNTHREADED 2ND HOLE | | SPECIAL FEATURES | INSTALLED ON THE SHAFT P/N 518-4457094-22; USED ON THE STEERING & STERN DIVE GEAR | | STYLE DESIGNATOR | PLAIN ROUND | | SURFACE FINISH | 32 MICROINCHES BOTH BEARING FLATS | | THICKNESS | 1.496 INCHES NOMINAL |
|
|