|
|
|
National Stock Number:
3040-01-499-0974
Federal Supply Class:
3040
National Item Identification Number:
014990974
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 167-7066791 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 167-7066791-107 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H547-1112-107 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 1.8760 INCHES MINIMUM AND 1.8810 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | OVERALL LENGTH | 30.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM 2 ANL HF AH FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, HINGE | | SPECIAL FEATURES | HINGE SHAFT IS TO THE "BRIDGE ACCESS TRUNK LOWER HATCH ASSEMBLY"; ONLY THE FIRST 7 INCHES OF SHAFT ENDS HAVE SMOOTH FINISH | | SURFACE FINISH | 63.0 MICROINCHES |
|
|