|
|
|
National Stock Number:
3040-01-499-1017
Federal Supply Class:
3040
National Item Identification Number:
014991017
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 563-7066807 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 563-7066807-60 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H552-0602-60 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| BORE DIAMETER | 2.149 INCHES MINIMUM AND 2.499 INCHES MAXIMUM | | BORE LENGTH | 4.000 INCHES NOMINAL | | BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 5.000 INCHES NOMINAL | | LINK END HOLE DIAMETER | 1.000 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | LINK END THICKNESS | 2.501 INCHES MINIMUM AND 2.509 INCHES MAXIMUM | | OVERALL WIDTH | 4.690 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BELL CRANK | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24480 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | SHAFT END THICKNESS | 4.000 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | LINK END HOLE HAS 2.000 INCH DIAMETER BOSS ON BOTH SIDES; 0.797 DIAMETER THRU HOLE IS ON SPLINE END CENTRALLY LOCATED AT 90 DEGREES TO MAIN AXIS; SIMILAR ITEM OF SUPPLY NSN:3040-01-499-1014 EXIST WITHOUT 0.797 DIAMETER HOLE | | STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END |
|
|