|
|
|
National Stock Number:
3040-01-499-2034
Federal Supply Class:
3040
National Item Identification Number:
014992034
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5HG90170-103 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3750 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5559 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.070 INCHES NOMINAL | | SECOND END DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | ONE PIN HOLE IS 0.192 THRU 0.189 IN DIAMETER AND IS 1.157 INCHES FROM LARGEST END OF SHAFT AND SECOND PIN HOLE IS 0.129 THRU 0.127 IN DIAMETER AND IS 2.270 INCHES FROM SMALLEST END OF SHAFT | | STEP QUANTITY | 6 |
|
|