|
|
|
National Stock Number:
3040-01-499-2059
Federal Supply Class:
3040
National Item Identification Number:
014992059
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 5HG90040-101 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.250 INCHES NOMINAL | | FIRST END DIAMETER | 1.5000 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.6500 INCHES MINIMUM AND 0.6580 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0950 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 0.748 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 TYPE 1 15-5PH STEEL 1.50 DIA ROD SOLN TREATED LENGH 9.00 INCHES ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 9.000 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 6.000 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | SPECIAL FEATURES | SHAFT HAS 3/8 INCH SQUARE DRIVE-INTERNAL; 2ND END THREADS ARE 0.7500-16 UNF-2A | | STEP QUANTITY | 4 |
|
|