|
|
|
National Stock Number:
3040-01-500-0082
Federal Supply Class:
3040
National Item Identification Number:
015000082
Description:
CAM,CONTROL
Detail:
AN IRREGULARLY SHAPED ITEM, THAT REVOLVES AROUND AN AXIS, OR SLIDES WITHIN LIMITS, WHICH ACTUATES OTHER PARTS BY CONTACT TO CHANGE THE DIRECTION, SPEED AND/OR TIMING OF A PART IN MOTION. A SHAFT IS NOT INCLUDED. IT USUALLY IS PART OF A CAMSHAFT (AS MODIFIED).
|
Manufacturer Information:
| 10249-1409 | 14304 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CAM, CAP DRIVE | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THICKNESS | 0.250 INCHES | | OUTSIDE DIAMETER | 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM | | SPECIAL FEATURES | ACETAL MOLDING MATERIAL; CENTER THRU HOLE 0.250 TO 0.253 INCH DIAMETER; 0.625 INCH FROM CENTER IS 0.120 INCH DIAMETER THRU HOLE WITH 82 DEGREE COUNTERSINK TO 0.235 INCH DIAMETER; A TAB IS LOCATED 0.875 INCH RADIUS FROM CENTER OF DISK; WIDTH OF TAB IS 42 DEGREES OF CIRCUMFERENCE AND IS ON SAME CENTER LINE AS TWO THRU HOLES |
|
|