|
|
|
National Stock Number:
3040-01-500-0652
Federal Supply Class:
3040
National Item Identification Number:
015000652
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 04-15-300 | 0AE28 | SYSTEMS ENGINEERING AND ANALYTICS, INC. | | PL-04-15-000 ITEM 2 | 0AE28 | SYSTEMS ENGINEERING AND ANALYTICS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 2.0000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.000 INCHES NOMINAL | | OVERALL LENGTH | 25.000 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GUIDE ROD, TADD | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-15726, ALLOY C71500, TEMPER 060 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | SECOND END EXTERNAL THREAD LENGTH | 0.997 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | SPECIAL FEATURES | MATERIAL IS COPPER NICKEL; NEXT HIGHER ASSEMBLY, P/N 04-15-000, TADD ASSEMBLY, 0A-9070E | | STEP QUANTITY | 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|