|
|
|
National Stock Number:
3040-01-500-7316
Federal Supply Class:
3040
National Item Identification Number:
015007316
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 7018029 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7018029-002 | 00724 | RAYTHEON COMPANY | | 7018029-002 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3060 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.557 INCHES MINIMUM AND 0.560 INCHES MAXIMUM | | OVERALL LENGTH | 2.890 INCHES MINIMUM AND 2.893 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,LATCH | | SECOND END ANGLE BETWEEN FLATS | 90.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.3690 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM | | SECOND END STEP LENGTH | 0.600 INCHES NOMINAL | | SECOND END STYLE | TWO FLATS | | SPECIAL FEATURES | NEAR FIRST END, PROVIDED WITH 0.500-20UNC-2A LEFT HAND THREADS X 0.675 LONG | | STEP QUANTITY | 7 |
|
|