|
|
|
National Stock Number:
3040-01-500-7616
Federal Supply Class:
3040
National Item Identification Number:
015007616
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 582-7067148 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 582-7067148-18 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H615-2002-18 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.5746 INCHES MINIMUM AND 1.5750 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 2.497 INCHES MINIMUM AND 2.500 INCHES MAXIMUM | | OVERALL LENGTH | 6.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-22698 AH-36 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, IDLER | | SECOND END EXTERNAL THREAD LENGTH | 1.500 INCHES NOMINAL | | SECOND END DIAMETER | 1.7500 INCHES NOMINAL | | SECOND END STYLE | EXTERNALLY AND INTERNALLY THREADED | | SECOND END INTERNAL THREAD LENGTH | 0.620 INCHES NOMINAL | | SPECIAL FEATURES | SHAFT ALSO HAS A 2.5 INCH LENGTH KEYWAY | | STEP QUANTITY | 7 |
|
|