|
|
|
National Stock Number:
3040-01-500-9321
Federal Supply Class:
3040
National Item Identification Number:
015009321
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 12477639 | 06085 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 12477639 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 12477639 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BORE TYPE | PLAIN STRAIGHT | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 32.370 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 2.375 INCHES NOMINAL | | LINK END HOLE DIAMETER | 1.753 INCHES NOMINAL | | LINK END THICKNESS | 5.720 INCHES NOMINAL | | OVERALL WIDTH | 5.710 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOOM, LEVER, LH, FORGING | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A668, CLASS LH NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SHAFT END THICKNESS | 2.400 INCHES NOMINAL | | SPECIAL FEATURES | THERE IS A 3 INCH DIAMETER HOLE IN CENTER FOR PIVOTING OF THE ARM, CLEVIS END ATTACHES TO A HYDRAULIC CYLINDER, AND THE OTHER END ATTACHES TO THE "STAYLINE CABLE" | | STYLE DESIGNATOR | OFFSET, CLEVIS LINK END |
|
|