|
|
|
National Stock Number:
3040-01-501-5075
Federal Supply Class:
3040
National Item Identification Number:
015015075
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 223-7068087-10 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7068087 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H758-0102-10 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.8700 INCHES NOMINAL | | FIRST END STYLE | SLOTTED | | FIRST END SLOT DEPTH | 0.220 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.250 INCHES NOMINAL | | LARGEST STEP DIAMETER | 1.870 INCHES NOMINAL | | OVERALL LENGTH | 2.860 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286, FORM-2, COND-A (CD): AH FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, ROLLER | | SECOND END EXTERNAL THREAD LENGTH | 1.670 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END STYLE | EXTERNALLY AND INTERNALLY THREADED | | SECOND END INTERNAL THREAD LENGTH | 0.120 INCHES NOMINAL | | SPECIAL FEATURES | USED ON THE BATTERY CELL HANDLING F&A TROLLEY ASSEMBLY; ITEM FUNCTIONS TO SUPPORT AND LUBRICATE THE ROLLER P/N 223-7068087-9; ITEM ALSO INCORPORATES A DRILLED HOLE AND EXTERNAL GROOVE TO ACCOMODATE LUBRICATION OF THE ROLLER | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|