|
|
|
National Stock Number:
3040-01-501-5680
Federal Supply Class:
3040
National Item Identification Number:
015015680
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 596-7409665 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7409665-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B831-2130-1 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | EXTERNAL KEYWAY LENGTH | 3.262 INCHES MINIMUM AND 3.264 INCHES MAXIMUM SECOND END | | FIRST END HOLE DEPTH | 0.964 INCHES MINIMUM AND 0.975 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.1200 INCHES NOMINAL | | FIRST END DIAMETER | 2.9980 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.380 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 7.630 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A564,TYPE 630,CONDITION H1150 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,LOCK | | SECOND END DIAMETER | 2.9980 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM | | SECOND END STYLE | FLAT KEYWAYS AND INTERNALLY THREADED | | SECOND END INTERNAL THREAD LENGTH | 3.450 INCHES NOMINAL | | SECOND END KEYWAY DEPTH | 0.1790 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM | | SECOND END KEYWAY WIDTH | 0.5060 INCHES MINIMUM AND 0.5080 INCHES MAXIMUM | | SPECIAL FEATURES | PROVIDED WITH INTERNAL 1.000-5 RH ACME 2G THREADS | | SURFACE FINISH | 32.0 MICROINCHES |
|
|