|
|
|
National Stock Number:
3040-01-503-3130
Federal Supply Class:
3040
National Item Identification Number:
015033130
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 596-7410249-43 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7410249 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B831-9511-43 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.5753 INCHES NOMINAL | | FIRST END EXTERNAL THREAD LENGTH | 0.940 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 2.500 INCHES NOMINAL | | OVERALL LENGTH | 19.130 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A564, TYPE 630, COND H1150 NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | VERTICAL PIVOT PIN | | SECOND END DIAMETER | 1.3750 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.870 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | SPECIAL FEATURES | THERE IS ALSO TWO KEY WAYS ON THIS SHAFT | | STEP QUANTITY | 8 |
|
|