|
|
|
National Stock Number:
3040-01-504-0608
Federal Supply Class:
3040
National Item Identification Number:
015040608
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 596-7410332-64 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7410507-17 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7410332 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7410507 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B434-5410-64 | 96169 | ELECTRIC BOAT CORPORATION | | B434-5412-17 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.4960 INCHES MINIMUM AND 1.4980 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 3.000 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.4960 INCHES MINIMUM AND 1.4980 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 1.2610 INCHES MINIMUM AND 1.2660 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 2.250 INCHES NOMINAL | | OVERALL LENGTH | 17.620 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286, FORM 2, COND-ANL (CD): AH FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY K-500 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, GEAR, INPUT | | SECOND END DIAMETER | 1.5000 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.070 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 1.070 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.3600 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1200 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED | | SPECIAL FEATURES | NEXT HIGHER ASSEMBLY: EXTERNAL ATHWARTSHIP DRIVE HANDLING EXTERNAL GEARBOX ASSEMBLY. (GEARBOX ASSEMBLY P/N 596-7410332-A2, NSN 3010-01-503-3377). | | STEP QUANTITY | 7 | | SURFACE FINISH | 16.0 MICROINCHES |
|
|