|
|
|
National Stock Number:
3040-01-505-1159
Federal Supply Class:
3040
National Item Identification Number:
015051159
Description:
AXLE,SHOULDERED
Detail:
An axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| A31170020 | 82366 | AERO-MOTIVE COMPANY | | A31170020 ITEM 11 | 82366 | AERO-MOTIVE COMPANY | | T003224299 | 59958 | CLEVELAND GEAR COMPANY, INC. | | T003224299 | 82366 | AERO-MOTIVE COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END HOLE DIAMETER | 0.3280 INCHES NOMINAL | | FIRST END DIAMETER | 1.0000 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 1.0625 INCHES NOMINAL | | OVERALL LENGTH | 31.750 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | AXLE | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A582 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | STEP QUANTITY | 3 |
|
|