| END SIMILARITY | NOT IDENTICAL |
| MATERIAL | STEEL CORROSION RESISTING |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL LENGTH | 13.500 INCHES NOMINAL |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| SPECIAL FEATURES | NEXT HIGHER ASSEMBLY IS P/N 901-236-010-101, MLG HANDLING ADAPTER; EQUIPMENT IS USED FOR MAINTENANCE OF THE AIRCRAFT'S MLG STRUT |
| WORM BODY LENGTH | 13.500 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | PROVIDED |
| WORM HELIX ANGLE | 29 DEGREES |
| WORM OUTSIDE DIAMETER | 1.000 INCHES NOMINAL |
| WORM THREAD DIRECTION | LEFT-HAND |
| WORM THREAD LEAD | 0.200 INCHES NOMINAL |
| WORM THREAD QUANTITY | 55 |
| WORM THREAD SECTION LENGTH | 11.000 INCHES NOMINAL |
| STRAIGHT UNTHREADED LENGTH | 1.000 INCHES NOMINAL FIRST END |
| STRAIGHT UNTHREADED LENGTH | 1.500 INCHES NOMINAL SECOND END |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.750 INCHES MINIMUM AND 0.751 INCHES MAXIMUM FIRST END |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.750 INCHES MINIMUM AND 0.751 INCHES MAXIMUM SECOND END |
| SURFACE TREATMENT | PASSIVATE |
| TAPERED BEARING SURFACE LARGEST DIAMETER | 0.751 INCHES NOMINAL |
| TAPERED BEARING SURFACE LENGTH | 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| TAPERED BEARING SURFACE SMALLEST DIAMETER | 0.750 INCHES NOMINAL |